Wind Mitigation Inspection Software That Saves Hours
Complete OIR-B1-1802 wind mitigation inspections faster with guided workflows, automated photo documentation, and AI-powered report generation. Built for Florida inspectors.
14-day free trial · No credit card required · Cancel anytime
What Is a Wind Mitigation Inspection?
A wind mitigation inspection evaluates a Florida home's structural features that resist hurricane damage. Required by insurance companies, these inspections use the OIR-B1-1802 Uniform Mitigation Verification Form to document:
Roof System
Roof covering type, age, and FBC compliance. Roof deck attachment method (staples, nails, screws). Roof-to-wall connection strength (toe nails through double wraps).
Wind Resistance
Roof geometry (hip vs. gable). Secondary water resistance barrier presence. These features determine how well a home withstands sustained hurricane winds.
Opening Protection
Impact-rated windows, doors, and skylights. Hurricane shutters. Garage door reinforcement. Every opening must be documented for full insurance credit.
How Verispec Handles Wind Mitigation Inspections
Every section of the OIR-B1-1802 form — with guided photo capture, smart classification, and AI-powered report assembly.
Roof Covering
Document FBC-equivalent or non-FBC roof covering. Capture installation date, permit numbers, and compliance with Florida Building Code. Guided photo prompts ensure complete documentation.
Roof Deck Attachment
Photograph and classify roof deck attachment methods — from staples (Level A) to 8d ring-shank nails (Level C). Attic access photos with clear nail pattern identification.
Roof-to-Wall Connection
Identify and document toe nails, clips, single wraps, or double wraps. Clear photo capture guides help you get the exact angles insurance companies need to verify connections.
Roof Geometry & SWR
Document roof shape (hip vs. non-hip) and secondary water resistance. Peel-and-stick underlayment, foam adhesive, and sealed deck verification — all with timestamped photo evidence.
Opening Protection
Catalog every opening — windows, doors, skylights, garage doors. Document impact-rated products, approved shutters, or unprotected openings. Track Miami-Dade NOA and Florida Product Approval numbers.
AI Report Generation
Once your inspection is complete, Verispec's AI assembles your findings and photos into a professional wind mitigation report — formatted, organized, and ready to deliver in minutes.
Finish Wind Mit Reports 3x Faster
Most inspectors spend 30–60 minutes writing up a wind mitigation report after leaving the property. With Verispec's AI, your report is assembled from your on-site notes and photos — ready to deliver before you start your next inspection.
Wind Mitigation Inspection FAQ
What is a wind mitigation inspection?
A wind mitigation inspection evaluates a home's ability to withstand hurricane-force winds. Required by Florida insurers, it examines roof covering, roof deck attachment, roof-to-wall connections, roof geometry, secondary water resistance, and opening protection. Passing can save homeowners 25–45% on insurance premiums.
What is the OIR-B1-1802 form?
The OIR-B1-1802 is the official Uniform Mitigation Verification Inspection Form required by the Florida Office of Insurance Regulation. It's the standard form used to document wind mitigation features for insurance discount eligibility. Verispec guides you through each section of this form.
Does Verispec fill out the OIR-B1-1802 form automatically?
Verispec provides guided templates aligned with the OIR-B1-1802 form sections. As you capture photos and select findings for each wind mitigation feature, the data is organized into a professional report with all required documentation.
What photos are needed for wind mitigation inspections?
Wind mit inspections require photos of: roof covering type and condition, roof deck attachment (from attic), roof-to-wall connections (clips, straps, etc.), roof shape/geometry, secondary water resistance, and opening protection (shutters, impact glass, plywood). Verispec's guided capture ensures you never miss a required photo.
How much does Verispec cost for wind mitigation inspections?
Verispec starts at $49/month for the Solo Inspector plan, which includes wind mit templates, AI report writing, and unlimited inspections. A 14-day free trial is available with no credit card required.
Start Completing Wind Mit Reports Faster
Join hundreds of Florida inspectors using Verispec for wind mitigation inspections. Start your free 14-day trial — no credit card, no commitment.
Start Free TrialAlso see: 4-Point Inspection App · Florida Inspection Software